Revolutionize your building maintenance with our Aerial Façade & Roof Inspection services. At Pro Inspect Solution, we utilize industrial-grade drones equipped with high-resolution and thermal imaging cameras to inspect high-rise buildings, inaccessible roofs, and expansive industrial sites. By removing the need for expensive scaffolding or risky gondolas, we provide a faster, safer, and more detailed assessment of your building’s envelope.
Traditional facade inspections using gondolas or abseiling (rope access) are slow, costly, and dangerous.
Cost-Effective: Eliminate the massive cost of erecting scaffolding or renting skylifts.
Speed: Inspect a 30-storey condominium block in days, not weeks.
Safety First: Zero risk to human life. Our engineers stay safely on the ground while the drone does the dangerous work.
Data-Driven: We capture thousands of data points, allowing us to map defects with GPS precision.
1. High-Rise Façade Inspection We scan every inch of your building’s exterior to identify:
Cracks & Spalling: High-resolution zoom lenses detect hairline cracks and loose concrete that pose falling hazards.
Paint & Cladding Defects: Identifying peeling paint, algae growth, or detached cladding panels.
2. Roof & Gutter Inspection
Accessing a roof is often difficult and dangerous. Our drones easily inspect:
Rust and corrosion on metal roofs.
Blocked gutters and drainage failures.
Damaged roof tiles or waterproofing membranes.
3. Thermal Imaging (Leak Detection)
The Invisible Problem: Water trapped under waterproofing or behind tiles holds heat differently than dry areas.
The Solution: Our thermal drones fly at sunset to detect these “heat signatures,” pinpointing the exact source of water leakage without hacking your walls.
Periodic inspection of high-rise condos.
Office towers, shopping malls, inspecting expansive factory roofs and chimneys.
Non-intrusive inspection that touches nothing, preserving the historic structure.
We adhere to strict safety protocols compliant with CAAM (Civil Aviation Authority of Malaysia) regulations.
We analyze the site for no-fly zones, wind conditions, and safety perimeters.
Our pilot flies the pre-programmed route, capturing visual (RGB) and Thermal (Infrared) imagery and our engineers analyze the data.
You receive a comprehensive report pinpointing every defect location, ready for your maintenance team or for remedial works.
Common questions about drone inspections
A survey of a building's external walls and roof using a drone with high-resolution and thermal cameras. Engineers review the images to find cracks, spalling, loose or detached finishes, corrosion and signs of water leakage.
A drone can cover a whole façade without scaffolding, skylifts or gondolas. It is faster, and nobody has to work at height for the initial survey.
Thermal imaging can show where moisture may be trapped behind finishes or under waterproofing, because wet areas hold heat differently from dry ones. Flights are timed for suitable conditions, and suspect areas are confirmed on site.
No. A drone records what is visible; it cannot tap tiles or test concrete. If the images show suspect areas, we recommend targeted close-up checks or testing as part of a building condition assessment.
Yes. Drone operations are regulated by the Civil Aviation Authority of Malaysia (CAAM). We plan each flight around no-fly zones, wind conditions and safety perimeters.
High-rise condominiums managed by JMBs or MCs, office towers, shopping malls, factory roofs and chimneys, and heritage buildings, where the inspection does not touch the structure.
Get a high-tech view of your property’s health. Contact us for a demo or quote.
Your one-stop engineering partner for Building Inspection, Dilapidation Survey, Concrete Assessment and Dispute Resolution. From advanced Drone & LiDAR surveys to Expert Witness services, we secure your property’s value and safety.
