Building inspection & engineering · Petaling Jaya, Selangor +60 16-806 4902 WhatsApp inspectsolution.pro@gmail.com
Home  /  Services  /  Property Defect Inspection (DLP)
Our Services

Property & House Defect Inspection in Malaysia (DLP)

Quick answer

A property defect inspection is a check of a new or existing home by our engineers and inspectors, ideally within the Defect Liability Period (DLP). It suits new homeowners, and buyers before purchase or renovation. You receive a report with photos and locations of the defects found, ready to submit to the developer for repair.

Condo · Landed · Commercial3–5 hours on sitePhoto report with locationsKL & Petaling Jaya
Inspector checking a wall beside a window in a newly handed-over home

Your DLP Clock

24 months from vacant possession under the HDA standard SPA. Book before renovation starts.

Overview

Before You Renovate or Move In

Congratulations on receiving the keys to your new home! But before you start your renovation or move in, ensure you aren’t inheriting costly repair bills. At Pro Inspect Solution, we specialize in Property Defect Inspections (also known as Snagging) for new condominiums, landed properties, and commercial units in Malaysia.

We help you maximize your Defect Liability Period (DLP) by identifying visible defects and signs of underlying issues, and recommending specialist investigation where needed. Rectification of qualifying defects may be claimable from the developer within the defect liability period.

Local Service Areas

House & condo defect inspection in Kuala Lumpur and house defect inspection in Petaling Jaya.

Why Inspect

Why Do You Need a Professional Inspection?

Many new homeowners assume “new” means “perfect.” Unfortunately, rushed construction often leads to workmanship issues like hollow tiles, leaking pipes, or poor electrical grounding.

Maximize Your DLP

You have 24 months from vacant possession to report defects. If you miss them, you pay for the repairs later.

Expert Eye

We spot issues the untrained eye misses—like hairline cracks that signal structural stress or gradient issues in bathrooms that cause ponding.

Official Report

We provide a professional defect report that you can submit directly to your developer’s management office for rectification.

Experienced Inspectors
Advanced Detection Tools
Comprehensive Reporting
Compliance with Standards
Scope

What We Check (Our Scope)

We conduct a rigorous room-by-room inspection covering three main categories:

Inspector using a torch to check wall paint finishing1

Architectural & Finishing

  • Floors & Walls: Checking for hollow tiles (using tapping rods), uneven surfaces, and painting defects.
  • Doors & Windows: Ensuring proper alignment, latching, and water-tightness.
  • Cabinetry: Checking for scratches, misalignment, and functionality.
Inspector testing a kitchen power socket in a new condo2

Mechanical & Electrical (M&E)

  • Plumbing: Stress-testing taps, showers, and toilets to detect leaks or low water pressure.
  • Electrical: Testing power points (sockets) for proper grounding and polarity (Live/Neutral/Earth).
  • Drainage: Ensuring bathroom and balcony floors have the correct gradient so water flows to the drain, not the corner.
Inspector photographing a balcony ceiling crack in a new condo3

Structural Observations

While this is a defect inspection, our background as engineering consultants means we keep an eye out for serious issues. If we spot major structural cracks, we can escalate this to a full structural condition assessment.

Building Condition Assessment
Who It’s For

Who Is This Service For?

New Homeowners

Just received keys (Vacant Possession) for a Condo, Terrace, or Bungalow.

Sub-Sale Buyers

Checking a second-hand property before signing the SPA (Pre-purchase inspection).

Investors

Ensuring your rental unit is tenant-ready without defects.

Better Process

Our Inspection Process

Inspectors arriving at a condominium lobby for a booked inspection01

Booking & Appointment

Contact us as soon as you get your keys. Ideally, the inspection should happen before you start any renovation.

Inspector checking floor falls during a bathroom ponding test02

On-Site Inspection

Our team spends 3–5 hours (depending on property size) carefully checking all accessible areas.

Inspector going through the defect report with a homeowner03

The Report

You receive a digital report listing the defects observed, with photos and locations.

FAQ

Property Defect Inspection FAQs

What is a property defect inspection?

It is a room-by-room check of a property, also called snagging, to find workmanship defects such as hollow tiles, leaks, poor drainage falls and electrical faults. You get a report you can hand to the developer for rectification.

When should I book the inspection?

As soon as you receive vacant possession (the keys), and before you start any renovation, so defects are not covered up or blamed on your renovation contractor.

How long is the defect liability period (DLP)?

For housing sold by licensed developers under the standard sale and purchase agreements of the Housing Development Act, the DLP is 24 months from vacant possession. Report defects within this period so the developer has to fix them.

What do you check?

Architectural finishes (floors, walls, doors, windows, cabinetry), plumbing and drainage including floor gradients, and power points for correct earthing and polarity. Because we are engineers, we also flag structural cracks that need a closer look.

How long does the inspection take?

Usually 3 to 5 hours on site, depending on the size of the property.

Can you inspect a sub-sale property before I buy?

Yes. A pre-purchase inspection before you sign the SPA shows you the condition of the property and the repairs it may need.

Contact Us

Get in Touch with Us

Book your defect inspection slot before your renovation starts.

Latest Insights

From the Blog

All Articles

Other Services

Don't Let Defects Become Your Problem

Protect your investment. Book your defect inspection slot before your renovation starts.